A. Fishman & Son is well known for fine quality jewelry production.  See Guarantee of A. Fishman & Son Quality.  Shown below are samples of some recent work we did for special orders.  They include fancy rings, earrings, and engagement rings.  We can do many other types of jewelry as well upon request.

Here is a very special ring with a 4.73ct Rd. Diamond in the center, fancy yellow round diamonds around the center, and two .80ct each heart shapes.

Here is an example of a custom made wedding ring with fancy yellow princess cut diamonds and pave round diamonds.

Here is an example of a custom made ring, hand-engraved, for a 5 carat princess cut with 6 princesses on the side weighing a total of 0.82cts.  Notice the exceptional workmanship on the sides and under the center stone.

Here is an example of a very special ring.  In Platinum, it has a 7.19ct fine EC Sapphire with 76 round diamonds weighing a total of 1.87cts.  Notice the fine pave work under the bezel of the center stone.

A special ring with a 5.61ct cushion sapphire, 2 trilliant diamonds 1.66cts T.W. and 100 pave round diamonds 0.45cts.

Here is an example of a three stone ring with a 2.01ct E.C. Diamond with two E.C. Diamonds 0.80cts each.

Here is another example of a three stone ring with a 1.62ct E.C. Diamond and two E.C. Sapphires.

Here is an example of special order workmanship for a 0.81ct pear shape diamond with 2 pear shape diamonds weighing 0.41cts.  Notice the fine wire work on the side view of the ring which our customer especially wanted.

Here is another example of our workmanship on a specialty mounting with a 1.25ct Rd. Diamond with two P.S. Diamonds.

Here is an example of a three stone diamond ring with a 1.50ct Rd. Diamond with two 0.63ct Rd. Diamonds.

Here is an example of a custom ring with a 1.31ct center and 4 round diamonds , 2 @ 0.52ct T.W. and 2 @ 0.33ct T.W.

Here is an example of a custom ring with a 3.03ct EC center and channel set baguette diamonds.

Here is an example of a three stone ring with a 3.03ct Mq. Diamond and 2 P.S. Diamonds weighing a total of 1.38cts.

Here is an example of a custom made pair of exquisite diamond earrings containing 10 Marquise Diamonds and 6 Pear Shape Diamonds, weighing a total of 11.09cts.

Here is a Bracelet made in 18Kt. Y.G. with 18 pear shape diamonds, each approximately 3/4 carat each.

This necklace was produced with the customer's antique cameo brooch, to which we added a fine basket underneath and used 7 strands of 5mm cultured pearls.

Here is an example of a custom made diamond pendant with a snake chain. The center is a 1.73ct round diamond.

Here is a removable platinum diamond jacket for a pair of 2 ct. each round diamond studs.  The jacket consists of marquise and round diamonds with a pear shape at the bottom.  We can also add a wire mechanism so that a  removable drop can be added to this earring.

Here is an example of a diamond pearl clasp for a double strand of pearls. 

Back to Table of Contents

back to home | table of contents | email A. Fishman & Son

Copyright © 2007 A. Fishman & Son. All rights reserved.